Most of the hose bibs at Kenthill Townhomes are ordinary, standard, non frost free hose bibs. Over the past thirty years, when there was a problem with these hose bibs, such as when they leaked, etc., they were replaced. Some of these were just replaced by ordinary, standard, non frost free hose bibs. But others were replaced by the better, but more expensive frost free hose bibs. These new exterior faucets are “frost-free” meaning the shut off, or point in which water is not exposed to the exterior elements, is within the insulated portions of the house, or in our case, condo, thus minimizing the potential of the faucet to freeze. If the hose bib is of the frost free variety, the process of turning the water on and off drains the remaining small amount of water in the system, and this occurs every time the valve is closed, as the stop itself is located 12 inches or more away from the spout. That distance is usually always inside a wall in a heated space. No additional freeze protection is required.
However, these new frost free hose bibs are not without their faults. They can and do fail, and when this happens, it is almost always because the homeowner did not disconnect and remove the garden hose from the hose bib. Even when this happens during the winter months, garden hoses, having been disconnected by Board members or nearby homeowners, are often reattached by other homeowners to wash their vehicles or to water their plants. Then these garden hoses are not disconnected when they are done. This condition is the Achilles heel of these new frost free hose bibs: All garden hoses must remain disconnected from them during cold weather, otherwise the frost free feature of these hose bibs is defeated; it is simply the way they operate and how they are engineered to work. A garden hose will cause a frost free hose bib to freeze when the water in the garden hose freezes.
[Also, a related piece of information is that the average plumbing company today charges $250 per hour. Not only is this a factor, but this particular task of installing a new frost free hose bib usually (but not always) involves acquiring access to the interior of the Unit. All obstructions, such as hot water heaters or appliances, etc., must be moved out of the way. Then the dry wall or sheetrock inside the Unit must be cut in order for wrenches to be applied to the pipe on the other (the interior) side of the wall, as well as to the hose bib, located on the outside of the wall. Later the dry wall must be repaired, mudded, sanded, and painted. Historically, over the years when this type of project has been undertaken, the total project costs have proven to be very expensive].
However, these new frost free hose bibs are not without their faults. They can and do fail, and when this happens, it is almost always because the homeowner did not disconnect and remove the garden hose from the hose bib. Even when this happens during the winter months, garden hoses, having been disconnected by Board members or nearby homeowners, are often reattached by other homeowners to wash their vehicles or to water their plants. Then these garden hoses are not disconnected when they are done. This condition is the Achilles heel of these new frost free hose bibs: All garden hoses must remain disconnected from them during cold weather, otherwise the frost free feature of these hose bibs is defeated; it is simply the way they operate and how they are engineered to work. A garden hose will cause a frost free hose bib to freeze when the water in the garden hose freezes.
[Also, a related piece of information is that the average plumbing company today charges $250 per hour. Not only is this a factor, but this particular task of installing a new frost free hose bib usually (but not always) involves acquiring access to the interior of the Unit. All obstructions, such as hot water heaters or appliances, etc., must be moved out of the way. Then the dry wall or sheetrock inside the Unit must be cut in order for wrenches to be applied to the pipe on the other (the interior) side of the wall, as well as to the hose bib, located on the outside of the wall. Later the dry wall must be repaired, mudded, sanded, and painted. Historically, over the years when this type of project has been undertaken, the total project costs have proven to be very expensive].
